Part # : RB300
Suits Hoists with Wire Rope Size of : 16 mm (5/8″) and higher
Type : Wire Rope Hoist – Standard
This load limiter will suit hoists with a wire rope greater than 16 mm (5/8″). The load limiter is installed onto a hoist at the rope’s dead end or equalizer sheave.
When your load exceeds the lifting capacity of you crane, a load limiter will cut power to the up control of your hoist, forcing you to move the load down. This can prevent injury, avert lost downtime from a damaged crane, and prevent expensive accidents and insurance claims.
This load limiter is custom built to be calibrated to your hoist’s capacity. The load limiter is electrically connected yoru hoist’s up control. When the hoist lifts the load it it increases the tension of the rope, which activates the limit device.
If you need help selecting the correct load limiter for your hoist and environment please let us know. We will supply you with a load limiter that meets your exact needs. Whatever your single line load capacity, work environment, or wire rope size, your limit switch will be custom made to your requirements.
Note: If your hoist has wire rope greater than 22 mm (7/8″), please contact us before ordering.